Much like the left-handed scissors you might remember from school classrooms, left-handed nail implements can be a huge improvement over traditional (right-handed) implements because they allow left-handed techs to maintain a clear view of the nail at all times, plus alleviate the need for them to twist their wrists or arms into uncomfortable positions. Ask your favorite implement manufacturer if it makes a left-handed version of the implements you use. Here are a few left-hand-friendly tools we found.
Many right-handed workers think of manicure tables as neutral pieces of furniture that either a right- or left-handed person can use. However, left-handed techs generally find that all of the drawers, cabinets, supplies, cables, and really everything a tech needs to do her job are a long reach from her dominant hand. “I liked that I was allowed to reverse my table set-up for my state board exam because the positions of my implements and products were taught backward to me,” says left-handed tech Tracie McNeal of WildSide Nailz Art Studio in Lancaster, Calif. “Nearly every tech I see keeps her dappen dishes and powders to whichever side she holds her brush. As do I.”
Left-handed techs who we spoke to overcame this problem by having their tables custom built or, in several cases, reaching an agreement with the salon owner in which the owner purchased the custom table for them. Kathy Wagner of Frank’s On First in Casper, Wyo., commissioned her woodworking husband to build one based on her drawing. “I needed a drawer on the left side as well as a cupboard for tall bottles. This conclusion came from trying other tables,” she says.
If you’re currently shopping for a left-handed manicure table, many salon furnishing companies will custom build one for you. “We make all of our pieces to the customers’ specs,” says Jason Mondene, a representative of Design X Manufacturing, adding that the price is the same at Design X regardless of the side onv which the drawers are placed. Mondene also suggests nail bars as a solution (where the nail techs work side-by-side on a long tabletop) since these typically feature storage in the center of the table (under the work surface), providing equal access to both hands.
Since electric files are motorized and have the capacity for quick injury to tech or client if used incorrectly, it’s especially important that nail techs — both left- and right-handed — are trained in proper e-file usage and are following best practices. (We recommend you take an in-person training class before using an e-file on clients.) That said, there are special considerations for left-handed e-filers. E-file instructor and (right-handed) nail tech Vicki Peters, who has been teaching for more than 15 years, says she gets about four lefties enrolled in each of her classes. She dispels the myth that left-handed e-filers have to learn from left-handed instructors. She says simply that the instructor “should mirror the left-handed tech when you teach them whereas I would stand behind the right handed tech to teach them.” Some of the key left-handed adaptations are:
Spin Direction: If you’re left-handed, be sure to only buy e-files that have “reverse” as a spin direction option. Most left-handed techs we interviewed said they are only comfortable filing in reverse (whereas most right-handed techs use “forward” for most services). However, that’s not to say all left-handed techs exclusively use the reverse setting. Peters says, “I have found that about half of the left-handed techs use the e-file in the forward motion and do not even know it.”
Starting Point: Most right-handed techs work in a left-to-right motion, which means, since the tech and client are facing each other, the tech starts with the client’s right hand. Whereas most left-handed techs work in a right-to-left motion, so they start with the client’s left hand first. (This goes for other prep aspects of the service, plus polishing too, not just for e-filing.) However, this is also a matter of personal preference.
Balance for Control: In her classes, Peters has noticed that left-handed techs have more difficulty balancing their hands with the fulcrum finger when filing. Instead, left-handed techs tend to place the inside of their wrists on the table and balance that way, which gives them less control.
Bits: Finding the correct bits, the attached abrasive piece of an electric file used directly on the nail, can be a major challenge for lefties. The problem lies primarily with carbide bits (bits made of hard metals like tungsten carbide) because these bits have “teeth” (also known as flutes) that must face in one direction or another.
Next page: Innovations In Bits and Being Ambidextrous
*Innovations in bits: Just a few weeks ago, Young Nails launched a bit exclusively for left-handed e-filers. It’s called the “Left-Handed X-Cut.” Young Nails president Greg Salo said his “aha” moment happened several years ago when a bit tooling company sent Young Nails a batch of X-Cut bits with the teeth facing straight (instead of the usual counterclockwise). Young Nails sent the bits to its customers and almost immediately started getting calls from customers who were cutting themselves and their clients. When Salo inspected the batch of bits, he “realized just how important the curve of the teeth is.” He told NAILS that when the teeth face the wrong way (including facing straight like this batch did, which Salo said isn’t good for either right- or left-handed techs), it can cause the bit to bounce or ricochet off the surface off the nail, sometimes into skin. He then realized that if he reversed the direction of the teeth he would have a bit that’s ideal for lefties. With more and more techs e-filing now, he said the timing is perfect for the Left-Handed X-Cut. It’s been tested by left-handed techs for several months and has been getting rave reviews, according to Salo.
One possible perk to being left-handed is some of these techs have adapted to being ambidextrous, using both hands equally for nail services. “I think it’s because when we are young people try to get us to use our other hand, and therefore we end up being able to use both,” says Jenny Meek of Classy Nails by Jenny in Fletcher, Okla. Sam Rivenbark of East Coast Acrylic in Edenton, N.C., agrees. She says, “In fact I’m thankful because I can switch hands when I’m tired.”
You Might Also Like:
My B.I.F. (Best Implement Friend)
E-File Certification Workshops
For reprint and licensing requests for this article, Click here.