Technique

How does salon temperature or body temperature affect the acrylic application process?

September 01, 2002 | Bookmark +

How does salon temperature or body temperature affect the acrylic application process? Does it cause lifting or cracks?

Answer

Janeen Jesse: Acrylic polymers contain initiators, the keys to starting the chemical reaction with the monomer that creates polymerization or “curing” of the acrylic product. In the presence of heat, the initiator molecules mixed into the polymer trigger the curing process. Many monomers cure at 68°-74°F, normal room temperature. You client’s body temperature will not impede the curing process, even if she has cold hands. It’s the salon temperature and product temperature that matter most.

In my experience, lifting and cracks, as well as the crystallization often attributed to cold temperatures during application, are usually caused by an improper ratio of liquid to powder—not by temperature-related factors. Most manufacturers recommend a medium-wet bead consistency, but you should check with your product’s manufacturer for specific recommendations.

If you were mixing cement, you can imagine that too much water would make the cement weak. Too much cement mix would make it brittle. It’s the same with acrylic. A mix ratio that is too dry will create acrylic prone to breakage. Too much liquid is a common cause of lifting.

As the acrylic cures and shrinks over several days, an overly wet mix will shrink too much, forcing the apex of the acrylic nail to detach from the nail plate—a phenomenon called center lifting.

So although other factors such as nail preparation and the client’s lifestyle can contribute to lifting and cracking, avoiding drafts and maintaining a proper mix ratio will help to avert these problems.

 

Read more about
Bookmark +

How can I prevent lifting when my client's hands are constantly in water?

I have a client who is in the medical field so her hands are constantly in water. She has me keep the length of her acrylic nails short. No matter what I do, she always has at least one nail that comes off, and she always has lifting and gets water under the acrylic. I prep the nails correctly, I have a cuticle bit to clean the cuticle area, and I wipe the nail with alcohol, dehydrate the nail, and prime the nail. What should I do?

We respect your data and privacy.
By clicking the submit button below, you are agreeing with Bobit’s Privacy Policy and this outlined level of consent.

Load More
a Bobit media brand

Create your free Bobit Connect account to bookmark content.

The secure and easy all-access connection to your content.
Bookmarked content can then be accessed anytime on all of your logged in devices!

Create Account