Nails
MenuMENU
SearchSEARCH

Technique

Are there special considerations when cutting elderly clients' toenails?

January 1, 2004

I do a lot of pink-and-white acrylic nails. They sometimes turn yellow after one or two weeks. How do I prevent this?

Christine Turner: There are many reasons for yellowing. First, you need to decipher if the yellowing is topical or within the acrylic itself. If it is topical, it may be your top coat or the acrylic’s top layer itself that is yellowing due to exposure to UV light or chemicals. Ask your clients some questions about their lifestyle to narrow the field. Do they tan in- or outdoors? Do they use a self-tanning lotion or a tan lotion with bronzer in it? Do they wear gloves when they clean? Are there any chemicals they might be inadvertently handling without gloves? Hair color and some hair products can cause yellowing. I had one client with yellowing due to her poor quality top coat and another whose nails turned yellow when she used a nail strengthener designed for natural nails over her acrylic. In these instances, you can try using a UV-protective top coat to keep the color true or you may want to consider using an acrylic with UV-inhibitors or labeled “non-yellowing.”

If the yellowing is not on the surface, then there may be a more extensive underlying problem. If your brush has come in contact with another monomer, plastic, nail filings, or you have touched it with your fingers, it may be contaminated. Even using brush cleaners may not help and may in fact contribute to yellowing so use monomer to clean your brush instead. Storing your brush “tip up” can cause monomer to seep into the ferrule and also cause yellowing. You will know if your brush is contaminated if the lint-free pad that you wipe your brush on during application has traces of yellow on it. If this is the case, you’ll most likely need to replace your brush and discontinue whatever caused the contamination in the first place. Even the residue in a new brush can contaminate your acrylic application, so be sure to prepare it properly and remove all traces of residue before using it the first time. If the yellowing is on a couple of nails and appears to be deep within the acrylic, it may be caused by an air pocket between the acrylic and nail plate. Inaccurate mix ratios, oily or unsanitary nail plates, and bumping the nail can lead to pocket lifting. Over time, moisture and oils from the nail plate will collect under the pocket and start to discolor under the acrylic.

Check with your manufacturer for correct mix ratios to rule this out as a possibility. Be sure that you are starting with a clean, dry nail plate and use an antiseptic or dehydrator to thoroughly clean the nail before every application. Keep in mind that acrylic can also discolor or lose its color over time. It’s a good habit to replace at least some of the acrylic over the entire nail — as opposed to just the new growth and free edge — when doing a backfill. Thin and shape the nail before you apply new product and lightly refine the new application with a fine grit so as to leave the fresh acrylic in place. This will help to keep the color true and prevent the older acrylic, which has grown up from the cuticle to the center or free edge, from becoming as brittle over time.

Are there special considerations when I cut the toenails of elderly clients? When should I refer them to a podiatrist?

Dr. Youner: The quick of the nail grows more closely to the nail tip as we age. Consequently, it becomes easier to nick a client if you cut too closely.

If you notice that the center of the underside of the nail is thickened, take care to avoid cutting into this area, as it will bleed. If the client is a smoker, diabetic, or has poor circulation, her nails will grow more slowly and her skin will be thinner and more fragile. Take care reducing calluses. Gentle rules on this. The feet are also more sensitive. If the nail technician notices any sores, especially on the bottom of the foot where the client can’t see them, or any bleeding, discoloration of nails or toes, foul odor, skin rash, or other abnormality (even an abnormally dark mole on the bottom of the foot), it is best to refer the client to the podiatrist. Any cracking between the toes can initially be treated with simple corn starch, but a fungal infection requires prescription medication.

I had a client with calluses between her toes. She asked me what can be done, but I couldn’t help her. Any suggestions?

Youner: Calluses between the toes are knows as ballerina corns and are very painful. They may be caused by a too-narrow shoe after as little as one day of wear or by toes that have been squashed together in shoes for too many years. After years of pressure, the bones grow and surgery may need to be performed. Trimming the inter-digital corn is helpful, as is the old ballet trick of wrapping the toe with lambs wool, available at most drugstores.

More FAQ

Problems with edges when doing acrylics?

I am still having a problem with my edges when doing acrylics. I would like to just get it right so I am not touching the sides and the cuticle.... read more

What is the best way to clean gel brushes?

I just started using gels. What is the best way to clean gel brushes?... read more

LED lamp efficacy across gel brands

Will the new LED lamps work with regular UV gels such as IBD, CND, or Star Nail, or does it only cure hybrid gels such as Gelish, Shellac, Gellac and other soak-off gels?... read more

How do I convince clients to try GelColor by OPI?

How do I convince clients to try GelColor by OPI?... read more

Can humidity cause lifting?

I live in central Florida. Every year when the humidity rises, natural nails start separating from the enhancements on the sides of the free edge. This leads to the enhancements chipping away. Every year, all summer long, I’m rebuilding free edges using forms and product. I’ve tried using a dehumidifier, but it does not seem to be helping.... read more

How can I get acrylic nails to shine better using top coats?

Can you tell me why when I use a top coat on acrylic nails the shine does not come out well? I must admit I don’t do the three-way shine after using the final white block prior to a polish application, but is there a best top coat for pure, long-lasting shine?... read more

Removing Gels to Apply Acrylic

There are many gel nail salons around where I live, meaning there are many people with gel nails. I do acrylic nails and I’m wondering if there is a special removal method to follow for gels because I know they don’t soak off like acrylic. I have a lot of people coming to me with their gel nails still on. Do I just thin them down as good as I can and apply the acrylic as usual? Will the acrylic still adhere with that thin layer of gel on? Or do I need to completely get rid of the gel and get to the natural nail to be able to apply the acrylic?... read more

Cleaning Dried Acrylic Off Brush

I need advice on how to get dried acrylic off my nail brush. I did my first set of fills today but now I am wondering how to clean my brush. My friend said soak it in acetone and then wash it really well. Could this affect my brush or is it OK to clean it?... read more

Acrylics Suddenly Lifting and Have Air Bubbles.

I’ve been a nail tech for three years and have worked at a few salons. I have since opened my own salon and am now having a problem with my acrylics. I am having a lot of lifting and air bubbles in the middle of the nail. I have never had this problem before. My technique has not changed. My prep is good. I remove the cuticle, rough up the nail, and prime. I have tried a few lines of products and it’s happening with all of them. Could it be the environment of the new shop? Please help!... read more

Clogged Airbrush

I have an airbrush machine that I have used one time. After that I have not been able to get any paint to spray out. I even bought a new attachment just in case I did something wrong or did not clean it properly. But before I try it again and risk ruining another attachment, can you please tell me what I might have done wrong? Is there a way to fix this problem?... read more

How can I make a correct C-curve without a tip and achieve an oval shape?

I don’t use tips — I’ve never been a fan. I build my pink-and-whites from scratch and have always been much happier with how they look and wear — my clients are too. But how can I make a correct C-curve without a tip and achieve an oval shape? I have several clients with an oval shape but I can’t get them this pointy and they end up having straighter sidewalls.... read more

I need help selecting a good UV light. What should I look for? Is price a good indicator?

I need help selecting a good UV light. What should I look for? Is price a good indicator?... read more