Nails
MenuMENU
SearchSEARCH

Technique

Can you offer any advice on how to keep my pink-and-white sculpts from turning out too thick?

June 1, 2005

Leeanne Colley: I suggest you concentrate on the correct mix ratio, which is most commonly medium-wet. Most nail techs find sculpting hard to master because you are building the enhancement to emulate the natural nail without the guidance of a tip. When liquid-and- powder systems are used with the correct mix ratio, the enhancement is strong enough without having to build an overly thick nail. Also, apply only one ball in each zone, which will prevent you from “patchworking” the enhancement.

However, you may add one tiny compact ball for each “dogear” to build a deep smile line when sculpting the free edge.When doing a backfill, be sure to rebalance each zone, not just the cuticle area.

Pam Karousis: First, check the type of brush you are using. Does it pick up too much liquid and powder, thereby creating a thick nail? You might try using a slightly smaller brush or a different shaped brush to see if that makes a difference. Is your white tip too thick? If this is the case, chances are you are trying to add enough pink to build up against the white tip. Ideally, you would sculpt a thin white tip and allow it to set before adding the pink. If it’s still too thick, you could wait until it sets up completely then gently thin it with a file to get the desired thickness before you add the pink. The finished nail structure should appear slightly thinner at the free edge, then ever so slightly thicker at the stress area, then gradually thin out around the cuticle area.

After you are done sculpting and filing, you should be able to take a cuticle pusher and push the cuticle back without any resistance from the edge of the acrylic around the cuticle. It should be that well blended.You don’t want any “ledges” or “cliffs” around the cuticle.

To isolate the problem, try sculpting one entire nail from start to finish — even buffing it out — and see if you think there is something you could improve upon when you sculpt the next nail from start to finish. If you can find a guinea pig to practice this on, it would help you refine your technique immensely.

More FAQ

Why do I get lifting around the cuticle on my acrylics?

I have problems with acrylic lifting. I have very good prep and can find no problems with my application. The only thing I can come up with is maybe I put the apex in the wrong spot. I put my apex in the middle of the nail, not necessarily on the spot on the natural nail where the free edge joins the nail bed. Is this the reason why I get lifting around the cuticle? It seems if I put the apex back further (if the nails are long) then they will look a bit silly.... read more

What is the difference between acrylic brushes and gel brushes?

What is the difference between acrylic brushes and gel brushes?... read more

How do I get a perfect acrylic bead?

How do I get a perfect acrylic bead?... read more

If I’m applying polish over gels, do I need to use clear sealer, then base coat?

If I’m applying polish over gels, do I need to use clear sealer, then base coat?... read more

If I’m applying polish over acrylics, do I need to apply base coat before I put polish on?

If I’m applying polish over acrylics, do I need to apply base coat before I put polish on?... read more

Why do I have air bubbles when I glue on tips?

When I glue on tips there are always air bubbles that show. In addition, it takes forever for the glue to dry. I have seen some people (in the malls) put a dinky dab of glue on and it adheres immediately with no bubbles. I have tried all sorts of glue. What am I missing? Is it the way I’m using it or is it the product?... read more

What’s the best way to clean my acrylic brush?

What’s the best way to clean my acrylic brush?... read more

What are party nails?

What are party nails? I was told they are some kind of a tip that can be worn for a short time. Do you use them with an overlay or just the tip?... read more

How do I safely use a drill with a sanding bit?

I’m thinking about using a drill with a sanding band to prep. How do I use it and avoid damage to the nail plate? I’m concerned about what speed, what grit, and what kind of band, and whether I can use it to remove pterygium.... read more

Why do I keep getting air bubbles in my acrylic?

Why do I keep getting air bubbles in my acrylic?... read more

Is there an easy way to remove a UV gel top coat? Or is there a product for removing this?

Is there an easy way to remove a UV gel top coat? Or is there a product for removing this?... read more

Some of my clients complain that their acrylic lifts too quickly from on top. How can I avoid this?

Some of my clients complain that their acrylic lifts too quickly from on top. How can I avoid this?... read more