Nails
MenuMENU
SearchSEARCH

Technique

Could chlorine in the water make my client's acrylics lift?

December 20, 2010

Water, whether chlorinated or from the tap, will not by itself cause lifting. However, if lifting has already begun, frequent exposure to water will exacerbate the problem. Lifting should not occur if the nail is properly prepared and the correct liquid-to-powder ratio is applied. It is also important to leave a 1/16-inch margin around the cuticle and side-wall. When acrylic cures, it will shrink slightly and grip the nail plate with an airtight seal. When acrylic product is applied to the cuticle and touches the skin, natural oils can be quickly absorbed into the product, and lifting will occur. — Preuss

Although I have been taught that chlorinated water will not cause lifting, sometimes I think it is possible. In any case, I suggest dehydrating the nails thoroughly, then either use a UV light-activated acrylic system or apply heat from your table lamp to traditional acrylics. — Stadamire

Although prolonged exposure to water (chlorinated or not) is not advisable, it may not be the primary cause of lifting. Review your application procedure, including preparation and filing techniques. Also consider the client’s other activities and the time between appointments. A combination of factors may be responsible. — Schrabeck

There are so many causes or potential reasons for “problem” lifting, but chlorinated water is usually not one of them. Although overexposure to water may cause the natural nail to expand and contract, pulling away from the edges around the free edge, it should not cause acrylic to lift from the nail. — Roberts

You Might Also Like:

Something to Talk About: Product Lifting

Something to Talk About: Water-Logged Nails



More FAQ

What is the difference between acrylic brushes and gel brushes?

What is the difference between acrylic brushes and gel brushes?... read more

How do I get a perfect acrylic bead?

How do I get a perfect acrylic bead?... read more

If I’m applying polish over gels, do I need to use clear sealer, then base coat?

If I’m applying polish over gels, do I need to use clear sealer, then base coat?... read more

If I’m applying polish over acrylics, do I need to apply base coat before I put polish on?

If I’m applying polish over acrylics, do I need to apply base coat before I put polish on?... read more

Why do I have air bubbles when I glue on tips?

When I glue on tips there are always air bubbles that show. In addition, it takes forever for the glue to dry. I have seen some people (in the malls) put a dinky dab of glue on and it adheres immediately with no bubbles. I have tried all sorts of glue. What am I missing? Is it the way I’m using it or is it the product?... read more

What’s the best way to clean my acrylic brush?

What’s the best way to clean my acrylic brush?... read more

What are party nails?

What are party nails? I was told they are some kind of a tip that can be worn for a short time. Do you use them with an overlay or just the tip?... read more

How do I safely use a drill with a sanding bit?

I’m thinking about using a drill with a sanding band to prep. How do I use it and avoid damage to the nail plate? I’m concerned about what speed, what grit, and what kind of band, and whether I can use it to remove pterygium.... read more

Why do I keep getting air bubbles in my acrylic?

Why do I keep getting air bubbles in my acrylic?... read more

Is there an easy way to remove a UV gel top coat? Or is there a product for removing this?

Is there an easy way to remove a UV gel top coat? Or is there a product for removing this?... read more

Some of my clients complain that their acrylic lifts too quickly from on top. How can I avoid this?

Some of my clients complain that their acrylic lifts too quickly from on top. How can I avoid this?... read more

How do I know how thick to apply acrylic?

I’m worried that I am applying the acrylic too thick in some places and then entirely too thin in others. How do you know when, “enough is enough?”... read more