Technique

How can I avoid gel-polish pulling away from the free edge?

December 14, 2017

Many factors cause gel-polish to shrink. It’s important to start at the beginning of the service to cover all factors. Have clients wash their hands with non-moisturizing soap and water, rinse and dry well, and use non-moisturizing hand sanitizer. Use a cotton ball with acetone to wipe each nail, including surrounding skin up to the first knuckle, to temporarily dehydrate the area. Prep the cuticle dry and remove shine from the nail, brush off all dust, and wipe clean with a lint-free pad (I use a makeup wedge) and alcohol. Apply dehydrator. At this point you should see a dry, non-shining nail plate. Allow the nail to dry completely before adding a thin coat of base coat and curing it for the full cure time. Thinness is key. Apply the first coat of gel-polish color thinly as well and set it for the full cure time. To test your bulbs, wipe the nail with alcohol and a lint-free pad after curing. If color comes off, your lamp is most likely the issue.

If it doesn’t, continue with gel-polish layers, top coat, and cap the free edges. Another advantage to curing for the full recommended time is that your client’s hand remains in the light, not getting into trouble as you are polishing the other hand. Finish with a scented cuticle oil and lotion to replenish the moisture and end the service on a fragrant note.

— Amy Masters, Dayton, Wyo.-based nail tech and salon owner.
Find out about her online nail workshops on Facebook @workshopsbyamymasters.

Topics:gel-polish

More FAQ

My clear and acrylic nails appear dull or frosted. What am I doing wrong?

After I apply clear or natural acrylic nails, they don’t appear clear. They have an almost frosted or dull look. What am I doing wrong? Am I applying too much?... read more

How to I keep wraps from lifting on a client with poor circulation?

I have a client with very poor circulation, and therefore, very cold hands, making it difficult to keep her silk overlays from lifting. I have already tried pH balancers and extra silk and resin, but the lifting continues to occur. What else could I try that might work?... read more

If I don't etch the nails before applying acrylics, do I need to apply more primer?

During my training for fills, I was taught to etch the natural nail regrowth for the strongest hold and to prevent lifting. Yet, I recently read that a technician did not etch the nail because it causes so much damage. I agree, but wonder what the major difference would be without etching? Should I apply more primer?... read more

Should I remove the gel overlay from my client's damaged nail?

I have a client who wears gels over her natural nails. She hit her nail really hard and although it didn’t come off, it did bleed underneath the nail plate. Should I remove the overlay from the nail? Should I be worried about infection setting in?... read more

Is it common to have to change products or procedures depending on the weather?

Is it common to have to change products or procedures (including changing the ration of the products) depending on the weather? Is it possible for perspiration to make the product lift?... read more

Can you over-cure gel?

Can you over-cure gel?... read more

Why do some of my clients feel a burning sensation when I use my e-file?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Why do some people wear gels over acrylic extensions?

I’ve heard that some people wear gels over acrylic extensions. Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this?

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

When I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. What can I do about this?

Myth Busters: Will suntan lotion mixed with the ocean's salty water turn gels to goo?

I heard that if you go into the ocean with a lot of suntan lotion on, the small amount of acetone in the suntan lotion interacts with the salt water and can run down your fingers and turn your gels to goo. Is this true?... read more

What’s the trick to getting dark glitters to cure when doing rock star gel nails?

What’s the trick to getting dark glitters to cure when doing rock star gel nails? I do my nail prep, then a layer of Akzentz Base N Gloss. I cure and put another layer of Base N Gloss, then sprinkle on the glitter and tap off some of the excess. I cure after that, and I brush off the excess again when it’s done, but a lot of glitter will come off with it. And this is with a brand new gel lamp. So I put on more gel, more glitter, etc., but I’d like to get it right the first time to save time.... read more

Prev Next