Technique

How can I stop lifting around the cuticle area?

June 18, 2007

First, make sure the product doesn’t come into contact with the skin. When this happens there is a pocket between the nail plate and the product that can cause lifting. Consistency is another cause. I always suggest taking a manufacturer’s class to learn the proper technique for that particular line. The last would be finishing around the cuticle to achieve a better seal. — MaeLing Parrish is co-owner of Nail Sensation in Columbus, Ohio.

Lifting of enhancements can usually be traced back to the nail tech’s procedure. Here are a few pieces of advice to help you avoid lifting. Make sure you follow proper prep before any application of coatings to the natural nail. Sometimes clients with oily (high-moisture content) nail plates can experience problems. Also, ensure you’re not applying your product at the wrong mix ratio, which can cause lifting. Read your acrylic system’s instructions before using, and try out different systems until you find the one that works best for you. — Jessica Marie Ellison is nail program instructor at the Yorkville School of Make-Up & Esthetics in Toronto.

Topics:acrylics lifting acrylic maintenance

More FAQ

Why is it that most of my acrylic clients are having lifting by the cuticle area?

Why is it that most of my acrylic clients are having lifting by the cuticle area? I prep properly, removing all the oils from the nail beds, and I prime twice. I’ve even considered using an 80-grit file. What can I do or what am I doing wrong?... read more

My clear and acrylic nails appear dull or frosted. What am I doing wrong?

After I apply clear or natural acrylic nails, they don’t appear clear. They have an almost frosted or dull look. What am I doing wrong? Am I applying too much?... read more

How to I keep wraps from lifting on a client with poor circulation?

I have a client with very poor circulation, and therefore, very cold hands, making it difficult to keep her silk overlays from lifting. I have already tried pH balancers and extra silk and resin, but the lifting continues to occur. What else could I try that might work?... read more

If I don't etch the nails before applying acrylics, do I need to apply more primer?

During my training for fills, I was taught to etch the natural nail regrowth for the strongest hold and to prevent lifting. Yet, I recently read that a technician did not etch the nail because it causes so much damage. I agree, but wonder what the major difference would be without etching? Should I apply more primer?... read more

Should I remove the gel overlay from my client's damaged nail?

I have a client who wears gels over her natural nails. She hit her nail really hard and although it didn’t come off, it did bleed underneath the nail plate. Should I remove the overlay from the nail? Should I be worried about infection setting in?... read more

Is it common to have to change products or procedures depending on the weather?

Is it common to have to change products or procedures (including changing the ration of the products) depending on the weather? Is it possible for perspiration to make the product lift?... read more

Can you over-cure gel?

Can you over-cure gel?... read more

Why do some of my clients feel a burning sensation when I use my e-file?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Why do some people wear gels over acrylic extensions?

I’ve heard that some people wear gels over acrylic extensions. Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this?

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

When I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. What can I do about this?

Myth Busters: Will suntan lotion mixed with the ocean's salty water turn gels to goo?

I heard that if you go into the ocean with a lot of suntan lotion on, the small amount of acetone in the suntan lotion interacts with the salt water and can run down your fingers and turn your gels to goo. Is this true?... read more

Prev Next