Technique

How do I know which electric file bit to use for which purpose?

April 1, 2005

First off, as a general rule, there is no reason to go heavier than a medium grit. It can be confusing since there are so many different types of bits to choose from, but I’ll describe a few to get you started.

First is an extra-fine, tapered buffer finisher. This looks like a prepper but the grit is extra-fine, making it useful for prepping the nail before a full set and doing finish work. Some companies call them a tapered smooth. (For finishing you could also use extra-fine sanding bands, which would be thrown away after each use.) The prepper is another useful choice. It looks like the tapered buffer, but it has a medium diamond grit and comes in large and small sizes to fit different size nails. The prepper is used when doing a fill to blend the existing product flush to the natural nail. For filing off acrylic, you could use a carbide barrel or medium diamond barrel to take down the bulk of a nail. The barrel is also good for taking down length.

Keep the bit parallel to the nail. Remember that carbides are the most aggressive and the edge of the barrel can do a lot of damage if not held correctly, so I recommend those just starting out use good-quality diamond bits and a medium round Swiss carbide barrel (the edge is rounded).

I also use a drilling solution, which helps to minimize friction and eliminate dust filings. It is still important to sculpt and shape with your brush even if you are using an electric file to refine the shape.

Having more than one set of bits is important if you are doing clients back-to-back so that you can follow the correct sanitation and disinfection steps. Just putting bits in acetone is not disinfecting; it only helps to remove acrylic from the bit.

Also remember that gels are a softer material to file. Damage to the nail plate can be avoided by using the right bit for the job, holding the bit at the proper angle, and keeping the bit moving to reduce friction. Practice on people close to you or on yourself to truly see how it feels. Remember that pressure causes friction and friction causes heat! Using an electric file without the proper training and practice is not advised. -- Debra Krasniak is an instructor at Cosmotech School of Cosmetology in Portland, Maine.

Topics:electric files

More FAQ

What’s the trick to getting dark glitters to cure when doing rock star gel nails?

What’s the trick to getting dark glitters to cure when doing rock star gel nails? I do my nail prep, then a layer of Akzentz Base N Gloss. I cure and put another layer of Base N Gloss, then sprinkle on the glitter and tap off some of the excess. I cure after that, and I brush off the excess again when it’s done, but a lot of glitter will come off with it. And this is with a brand new gel lamp. So I put on more gel, more glitter, etc., but I’d like to get it right the first time to save time.... read more

What could be causing the gel to shrink?

So on my last client of the day, I finish her fill, buff her nails, apply gel top coat to one of the hands and it turns out fine. But on the next hand, I do everything like I usually do, but when I put the hand in the light to cure the gel top coat, disaster happens. One finger looks like it has a hole in it (in the top coat) and the others look like the gel has literally shrunk, and they’re bumpy too. I file it all off and start again, but the same thing happens. I try one more time, and it’s still the same. I do it all one more time and even use a different lamp, but get the same results. My bulbs in both lamps are about four months old, so they shouldn’t need replacing yet. What could be causing this shrinking?... read more

What's the trick to getting dark glitters to cure when doing gel nails?

What’s the trick to getting dark glitters to cure when doing rock star gel nails? I do my nail prep, then a layer of Akzentz Base N Gloss. I cure and then put another layer of Base N Gloss, then sprinkle on the glitter and tap off some of the excess. I cure after that, and I brush off the excess again when it’s done, but a lot of glitter will come off with it. And this is with a brand new gel lamp. So I put on more gel, more glitter, etc., but I’d like to get it right the first time to save time. And this only happens with dark colors. What can I do?... read more

What causes shrinking on gel nails?

Is there any such a thing as a "universal" UV light?

Is there such a thing as a “universal” UV light unit or do I have to buy a different light unit for each gel system? ... read more

Is there such a thing as a “universal” UV light unit?

Is there such a thing as a “universal” UV light unit or do I have to buy a different light unit for each gel system?... read more

What’s the best way to put on a tip?

What’s the best way to put on a tip?... read more

What’s the best way to do a pink-and-white backfill?

What’s the best way to do a pink-and-white backfill? I’ve been doing them for years now and I still can’t get my time down. I go back and forth between the traditional way and the reverse method and neither one cuts any time off. I don’t know if I’m over-filing during prep. It usually takes me an hour and a half. I cringe when I have to do one these days. Any advice on cutting time or a new way of doing it?... read more

What's the best way to put on a tip?

What’s the best way to put on a tip?... read more

What's the best way to do a pink-and-white backfill?

What’s the best way to do a pink-and-white backfill? I’ve been doing them for years now and I still can’t get my time down. I go back and forth between the traditional way and the reverse method and neither one cuts any time off. I don’t know if I’m over-filing during prep. But I do have a couple clients who make it a point to tell me how hard it is for them to sit through my long backfills — it usually takes me an hour and a half. I cringe when I have to do one these days. Any advice on cutting time or a new way of doing it?... read more

How do I prevent polish from bubbling?

On some of my natural nail clients my polish tends to bubble. I clean the nail plate with acetone very well before I polish. Then I use base coat, two coats of polish, and top coat. I usually have them hold their fingers in front of a fan between coats, and I spray a rapid dryer on after I finish. Any ideas? ... read more

How do I get acrylic or gel to stick to pre-designed nail tips?

I have decided to try pre-designed nail tips with art, but I am having trouble getting the acrylic or gel to stick to them. After a few days the product lifts off the tips. I tried to gently file the surface of the tip first, but then it takes the design off.... read more

Prev Next