Nails
MenuMENU
SearchSEARCH

Technique

I have a client with fan-shaped nails that are also very flat.

March 1, 2003

irst, know that these are the most difficult type of nails to work with. So is she lifting? Cracking? Coming off? If she lifts at the cuticle, proper nail prep is a must. Make sure the cuticles are pushed back and the entire nail — especially around the cuticle edge — is well etched. If she is lifting from the free edge, you must remove the lifted area and replace it with new acrylic. Don’t try to make the nail follow the shape of the acrylic. Acrylic will grow straight out with very little flexing, but the natural nail will twist and turn (and dip down and up) especially once it leaves the nail bed.

If the nails are coming off, make sure there is no dust left on them and a bonding agent is used before applying the tip and before applying the primer. Next, I would suggest using a full well tip and a gel glue to accommodate the flat nail, making sure there are no air pockets under the tip. Also make sure the tip is as wide as the nail’s free edge. Concentrate your tip, blending to the center of the well that overlaps the nail (leaving the area closest to the cuticle the thickest). This enables the C-curve of the tip well to “flex” to the nail instead of squeezing its way off the nail bed. I’m a big advocate of acid-less primers, but in this situation I’d use an acid primer. It is especially important to make the free edge no more than half the length of the nail bed. The longer the free edge, the more pressure the stress area will take on. When applying the acrylic, having a good arch is important for added strength.

If the nail is cracking in the stress area, cut into the acrylic where it is cracked to allow the acrylic to get into the crack instead of just laying on it. Also when filling in, add a ball to each side of the nail (parallel to the cuticle) sweeping it toward the center of the nail. — Angie Gross is a nail tech at Soge Hair and Body Care in Atlanta


You have not said if you are using tips or sculpting, but I would assume that you are using tips. Try to sculpt her nails and see if you find a difference. You may also want to keep her natural nails under the enhancement shorter by using your electric file or a round file under the nails. You cannot force or change the shape of these nails. Her nails are most likely pulling away from the product and lifting. Keeping her nails shorter and preventing them from growing out might help you.— Lynnette Madden is owner of Salon 29 at Main in East Greenville, Pa.



More FAQ

Acrylic Glitter Mix Question

If I am mixing glitter into my acrylic powder what is the ratio I should use? Can I dip my wet ball into the glitter?... read more

Why aren't my soak-off gels looking shiny after the first few days?

All these soak-off gels are great, but I’ve noticed after a few days they aren’t as shiny as when first applied. I’ve tried several different top coats from regular nail polish top coats to the UV-cured top coats but they all peel off.  Any suggestions?... read more

Is it true that most white gels do not cure all the way?

Is it true that most white gels (whether traditional or soak-off) do not cure all the way? If so, why is that?... read more

A client wearing acrylics wants to come in weekly. Should another coat of acrylic be added or is there another procedure to follow?

A client wearing acrylics wants to come in weekly. Should another coat of acrylic be added or is there another procedure to follow?... read more

I have tried different products with no noticeable improvements [in lifting or popping]. Am I clipping too much?

I have been working as a nail tech for some years now, but have always had problems with clients’ nails lifting or popping off within two to three weeks. When they lift, I use a nail dehydrator after clipping the edges and filing the exposed natural nail, and then I double prime before applying acrylic. I have tried different products with no noticeable improvements. Am I clipping too much?... read more

Why do tiny white spots appear on my finished acrylics?

When I apply acrylic I sometimes get tiny white spots in my finished product. I was told that this could be from contaminated powder. I also sometimes get bubbles with the white spots. I assume the bubbles are form too much liquid to powder.... read more

If oil causes acrylic nails to lift, then why are we urged to use it and to tell clients to use cuticle oil?

If oil causes acrylic nails to lift, then why are we urged to use it and to tell clients to use cuticle oil?... read more

My client has constant lifting problems. Is she doomed to lifting, or am I doing something wrong?

I have a client whose nails always seem to lift around the cuticles no matter what I do. It happens as soon as her fill is finished. I’ve etched the nail well, cleansed it more than once, and always use a primer. Is she doomed to always have lifting, or am I doing something wrong?... read more

When someone comes to me for an acrylic fill and I wasn’t the one who put on the previous set, does it matter what product I use?

When someone comes to me for an acrylic fill and I wasn’t the one who put on the previous set, does it matter what product I use? Will my product adhere regardless?... read more

Can you use any primer with any acrylic?

Can you use any primer with any acrylic?... read more

What causes the burning sensation when gels are curing?

I recently tried out a UV light-cured gel system on myself. A couple of times, when letting the gels cure, I experienced a really intense burning sensation. What caused this and how can I avoid it?... read more

Could chlorine in the water make my client's acrylics lift?

I am a new tech with a client who does water aerobics for two hours each day. Her acrylics are always lifting. Could the chlorine in the water cause this?... read more