Nails
MenuMENU
SearchSEARCH

Technique

Is there any such a thing as a "universal" UV light?

November 1, 2009

Light Elegance and CND have light units that will cure all of the gels on the market. They are different from other lights (such as a 36-watt light unit) because the lamps (UV bulbs) are very close to the fingers and this results in a more powerful light and better curing. The next best option would be a 36-watt “tunnel” light. These have four 9-watt lamps for 36 watts of curing power, but the bulbs are farther from the fingernails and as such they are not as powerful. (Tunnel lights are available from Young Nails, LCN, and Nailite, as well as others.) These 36-watt tunnel lamps will cure nearly all gels – except for CND’s Brisa gel. Brisa gel does require the use of a CND or Light Elegance lamp to cure completely.

It is equally important to be sure to use good 9-watt bulbs in your light unit. It is best to purchase SLI, Philips, or Sylvania. These UV bulbs need to be changed regularly. If you have 30 to 40 gels clients a week, the bulbs need to be changed every four to six months. If you have 20 gels clients a week, you will want to change your bulbs every six to eight months. Once a year is sufficient for fewer than 20 gels clients a week. – Jim McConnell is president of Light Elegance.

More FAQ

What is the difference between acrylic brushes and gel brushes?

What is the difference between acrylic brushes and gel brushes?... read more

How do I get a perfect acrylic bead?

How do I get a perfect acrylic bead?... read more

If I’m applying polish over gels, do I need to use clear sealer, then base coat?

If I’m applying polish over gels, do I need to use clear sealer, then base coat?... read more

If I’m applying polish over acrylics, do I need to apply base coat before I put polish on?

If I’m applying polish over acrylics, do I need to apply base coat before I put polish on?... read more

Why do I have air bubbles when I glue on tips?

When I glue on tips there are always air bubbles that show. In addition, it takes forever for the glue to dry. I have seen some people (in the malls) put a dinky dab of glue on and it adheres immediately with no bubbles. I have tried all sorts of glue. What am I missing? Is it the way I’m using it or is it the product?... read more

What’s the best way to clean my acrylic brush?

What’s the best way to clean my acrylic brush?... read more

What are party nails?

What are party nails? I was told they are some kind of a tip that can be worn for a short time. Do you use them with an overlay or just the tip?... read more

How do I safely use a drill with a sanding bit?

I’m thinking about using a drill with a sanding band to prep. How do I use it and avoid damage to the nail plate? I’m concerned about what speed, what grit, and what kind of band, and whether I can use it to remove pterygium.... read more

Why do I keep getting air bubbles in my acrylic?

Why do I keep getting air bubbles in my acrylic?... read more

Is there an easy way to remove a UV gel top coat? Or is there a product for removing this?

Is there an easy way to remove a UV gel top coat? Or is there a product for removing this?... read more

Some of my clients complain that their acrylic lifts too quickly from on top. How can I avoid this?

Some of my clients complain that their acrylic lifts too quickly from on top. How can I avoid this?... read more

How do I know how thick to apply acrylic?

I’m worried that I am applying the acrylic too thick in some places and then entirely too thin in others. How do you know when, “enough is enough?”... read more