Nails
MenuMENU
SearchSEARCH

Technique

What would make you switch acrylic products?

December 1, 1999

It would take a miracle product to get me to switch. I spent seven years trying, sampling, and searching here and there before I found the one that worked for me. I have done nails for almost 10 years and the past few years have been the best. I believe it has a lot to do with the product I use.

Laura Bellavigna

Nailz & Tanz (Richmond Hill, Ga.)

In the 18 years I have been doing nails, I have changed products several times. I try to use the best product I know about at the time, but when I see a product advertised that has something different or is faster and lasts longer, I will give it a try. For me, cost is not the most important factor. If I’m convinced a product is better – and easier to apply – I would switch. I’ve seen hundreds of new products, but I can’t try all of them. I only try them if they appear to offer something my present product does not.

Jere Neal

Hair Villa (Fayetteville, N.C.)

It has been my experience that different products react differently from one client to the next. I keep several acrylic products on hand and use them accordingly. I start all of my new clients with my favorite acrylic and it usually works for everyone. However, if I see any signs of lifting, I change to another acrylic system until I find the one that works for that client.

Barbara Nott

Stylin’s Family Salon (Venice, Fla.)

I used the same product for about five years, so I knew shortly after I purchased a new bottle of monomer that something was wrong. Clients started calling the next day after their fill appointments, complaining or lifting. I called the manufacturer and walked through the 10-step process with them, and we agreed that I was doing everything right. I asked about a replacement and they said it wouldn’t be possible because there was nothing wrong with the product. It made me so angry that I refused to use that product line and threw out the rest of the monomer.

Brooke Gilliam

Nails by Brooke (Allen, Texas)

I would only switch my acrylic product if I could find one better in quality. Improved flexibility, color retention, quicker set-up time, better product adhesion, and self-leveling properties are what I find important. Less odor would be a benefit as long as it retained normal acrylic properties with no weird surfaces to file off. Cost is not a factor, as a truly great acrylic is priceless.

Carolyn Martinez

A Perfect 10 Nail Salon (Portland, Maine)

I would not change acrylic systems because when you find one that works for you and does not lift, chip, or yellow, then why change? I would try new products on myself, but that’s about it. Maybe I’d switch if I found a new one that worked well on me.

Andrea Randolph

Nails DeAndrea (Port Jervis, N.Y.)


More FAQ

Why is it that most of my acrylic clients are having lifting by the cuticle area?

Why is it that most of my acrylic clients are having lifting by the cuticle area? I prep properly, removing all the oils from the nail beds, and I prime twice. I’ve even considered using an 80-grit file. What can I do or what am I doing wrong?... read more

My clear and acrylic nails appear dull or frosted. What am I doing wrong?

After I apply clear or natural acrylic nails, they don’t appear clear. They have an almost frosted or dull look. What am I doing wrong? Am I applying too much?... read more

How to I keep wraps from lifting on a client with poor circulation?

I have a client with very poor circulation, and therefore, very cold hands, making it difficult to keep her silk overlays from lifting. I have already tried pH balancers and extra silk and resin, but the lifting continues to occur. What else could I try that might work?... read more

If I don't etch the nails before applying acrylics, do I need to apply more primer?

During my training for fills, I was taught to etch the natural nail regrowth for the strongest hold and to prevent lifting. Yet, I recently read that a technician did not etch the nail because it causes so much damage. I agree, but wonder what the major difference would be without etching? Should I apply more primer?... read more

Should I remove the gel overlay from my client's damaged nail?

I have a client who wears gels over her natural nails. She hit her nail really hard and although it didn’t come off, it did bleed underneath the nail plate. Should I remove the overlay from the nail? Should I be worried about infection setting in?... read more

Is it common to have to change products or procedures depending on the weather?

Is it common to have to change products or procedures (including changing the ration of the products) depending on the weather? Is it possible for perspiration to make the product lift?... read more

Can you over-cure gel?

Can you over-cure gel?... read more

Why do some of my clients feel a burning sensation when I use my e-file?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Why do some people wear gels over acrylic extensions?

I’ve heard that some people wear gels over acrylic extensions. Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this?

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

When I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. What can I do about this?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Myth Busters: Will suntan lotion mixed with the ocean's salty water turn gels to goo?

I heard that if you go into the ocean with a lot of suntan lotion on, the small amount of acetone in the suntan lotion interacts with the salt water and can run down your fingers and turn your gels to goo. Is this true?... read more