Technique

When you sculpt with gels, how do you get a C-curve?

February 1, 2005

When I sculpt with gels, I find it essential that the form be tight and fit correctly under the nail. I then apply a thin layer of gel and“flash” it under the light to allow the gel to cure partially, but not fully. This takes about 10-15 seconds.

Then, you can “pinch” the form or lightly squeeze the edges of the gel to get your curve. I then apply a second layer and let it cure for about 20-30 seconds. This is when I make the final adjustments to the curve. Cure for another minute or according to the directions of the system being used.

I use a one-step gel for the most part. If the first two layers are thin, then a third layer of gel can be applied. If my client has flat or eggshell nails, I do not give her a curve. I have found that forcing the nails to take on a shape that isn’t natural will lead to lifting or even discomfort for the client. -- Lynnette Madden is the owner of Salon 29 at Main in E. Greenville, Pa.

To get a strong C curve with gels, I recommend taking two clear forms (like Creative’s Performance Forms) and sticking them together one on top of the other. This will allow you to create a very strong form that you can apply to the finger with the desired C-curve. It will stay in place very well. I use this technique when competing with gels. -- Lee-Anne Baker-Smith is the owner of Fantasy Island in Barrie, Ontario, Canada

Topics:acrylic maintenance gels acrylics gel troubleshooting

More FAQ

Why is it that most of my acrylic clients are having lifting by the cuticle area?

Why is it that most of my acrylic clients are having lifting by the cuticle area? I prep properly, removing all the oils from the nail beds, and I prime twice. I’ve even considered using an 80-grit file. What can I do or what am I doing wrong?... read more

My clear and acrylic nails appear dull or frosted. What am I doing wrong?

After I apply clear or natural acrylic nails, they don’t appear clear. They have an almost frosted or dull look. What am I doing wrong? Am I applying too much?... read more

How to I keep wraps from lifting on a client with poor circulation?

I have a client with very poor circulation, and therefore, very cold hands, making it difficult to keep her silk overlays from lifting. I have already tried pH balancers and extra silk and resin, but the lifting continues to occur. What else could I try that might work?... read more

If I don't etch the nails before applying acrylics, do I need to apply more primer?

During my training for fills, I was taught to etch the natural nail regrowth for the strongest hold and to prevent lifting. Yet, I recently read that a technician did not etch the nail because it causes so much damage. I agree, but wonder what the major difference would be without etching? Should I apply more primer?... read more

Should I remove the gel overlay from my client's damaged nail?

I have a client who wears gels over her natural nails. She hit her nail really hard and although it didn’t come off, it did bleed underneath the nail plate. Should I remove the overlay from the nail? Should I be worried about infection setting in?... read more

Is it common to have to change products or procedures depending on the weather?

Is it common to have to change products or procedures (including changing the ration of the products) depending on the weather? Is it possible for perspiration to make the product lift?... read more

Can you over-cure gel?

Can you over-cure gel?... read more

Why do some of my clients feel a burning sensation when I use my e-file?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Why do some people wear gels over acrylic extensions?

I’ve heard that some people wear gels over acrylic extensions. Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this?

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

When I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. What can I do about this?

Myth Busters: Will suntan lotion mixed with the ocean's salty water turn gels to goo?

I heard that if you go into the ocean with a lot of suntan lotion on, the small amount of acetone in the suntan lotion interacts with the salt water and can run down your fingers and turn your gels to goo. Is this true?... read more

Prev Next