Technique

Why do my clients' acrylic nails look discolored?

December 20, 2010

It sounds like moisture us getting underneath the gray nail. This happens when your product seal is not sealing properly. Check to see of there is a crack somewhere on the nail that is allowing moisture to get in. The yellowing could be caused by using a contaminated brush or brush cleaner, or from a product that is not “non-yellowing.” — Tracey Stadamire

Yellowing can occur from using old acrylic product or from monomer that doesn’t have a UV protectant. Make sure you store monomer in a dark, cool place, always use a proper dispenser made for that product, and never mix old and new monomer together. — Michele Martinez

Discolored nails could be the result of several things, including exposure to contaminated liquid, powder, primer, or brushes. Another contributing factor is nail enamel. Make sure to oil buff the nails and use a good base coat prior to polish application. Also, acrylic that has not been sealed properly by oil buffing (or buffing with a three-way buffer) will be porous and can become stained by the pigments in enamel. — Marti Preuss

Most acrylic products will “age” and discolor. Yellowing is not unusual. A definite spot of yellow-orange on the nail could mean that the primer is touching the existing acrylic during a fill. Gray nails are usually caused by contamination or the use of a “dirty” compound. — Sue Roberts

You need to determine whether it is the natural nail or the acrylic that is discolored. Discolored natural nails could either indicate poor circulation (gray-purple) or surface stains from nicotine, polish, etc. (yellow-orange). Discolored acrylic product indicates either the use of inferior product (old liquid or no UV protectors) or poor technique (mixing liquid with primer or not using fresh liquid with each service). — Jaime Schrabeck

Topics:acrylics techniques acrylic maintenance

More FAQ

My clear and acrylic nails appear dull or frosted. What am I doing wrong?

After I apply clear or natural acrylic nails, they don’t appear clear. They have an almost frosted or dull look. What am I doing wrong? Am I applying too much?... read more

How to I keep wraps from lifting on a client with poor circulation?

I have a client with very poor circulation, and therefore, very cold hands, making it difficult to keep her silk overlays from lifting. I have already tried pH balancers and extra silk and resin, but the lifting continues to occur. What else could I try that might work?... read more

If I don't etch the nails before applying acrylics, do I need to apply more primer?

During my training for fills, I was taught to etch the natural nail regrowth for the strongest hold and to prevent lifting. Yet, I recently read that a technician did not etch the nail because it causes so much damage. I agree, but wonder what the major difference would be without etching? Should I apply more primer?... read more

Should I remove the gel overlay from my client's damaged nail?

I have a client who wears gels over her natural nails. She hit her nail really hard and although it didn’t come off, it did bleed underneath the nail plate. Should I remove the overlay from the nail? Should I be worried about infection setting in?... read more

Is it common to have to change products or procedures depending on the weather?

Is it common to have to change products or procedures (including changing the ration of the products) depending on the weather? Is it possible for perspiration to make the product lift?... read more

Can you over-cure gel?

Can you over-cure gel?... read more

Why do some of my clients feel a burning sensation when I use my e-file?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Why do some people wear gels over acrylic extensions?

I’ve heard that some people wear gels over acrylic extensions. Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this?

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

When I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. What can I do about this?

Myth Busters: Will suntan lotion mixed with the ocean's salty water turn gels to goo?

I heard that if you go into the ocean with a lot of suntan lotion on, the small amount of acetone in the suntan lotion interacts with the salt water and can run down your fingers and turn your gels to goo. Is this true?... read more

What’s the trick to getting dark glitters to cure when doing rock star gel nails?

What’s the trick to getting dark glitters to cure when doing rock star gel nails? I do my nail prep, then a layer of Akzentz Base N Gloss. I cure and put another layer of Base N Gloss, then sprinkle on the glitter and tap off some of the excess. I cure after that, and I brush off the excess again when it’s done, but a lot of glitter will come off with it. And this is with a brand new gel lamp. So I put on more gel, more glitter, etc., but I’d like to get it right the first time to save time.... read more

Prev Next