Nails
MenuMENU
SearchSEARCH

Technique

Can you offer any advice on how to keep my pink-and-white sculpts from turning out too thick?

June 1, 2005

Leeanne Colley: I suggest you concentrate on the correct mix ratio, which is most commonly medium-wet. Most nail techs find sculpting hard to master because you are building the enhancement to emulate the natural nail without the guidance of a tip. When liquid-and- powder systems are used with the correct mix ratio, the enhancement is strong enough without having to build an overly thick nail. Also, apply only one ball in each zone, which will prevent you from “patchworking” the enhancement.

However, you may add one tiny compact ball for each “dogear” to build a deep smile line when sculpting the free edge.When doing a backfill, be sure to rebalance each zone, not just the cuticle area.

Pam Karousis: First, check the type of brush you are using. Does it pick up too much liquid and powder, thereby creating a thick nail? You might try using a slightly smaller brush or a different shaped brush to see if that makes a difference. Is your white tip too thick? If this is the case, chances are you are trying to add enough pink to build up against the white tip. Ideally, you would sculpt a thin white tip and allow it to set before adding the pink. If it’s still too thick, you could wait until it sets up completely then gently thin it with a file to get the desired thickness before you add the pink. The finished nail structure should appear slightly thinner at the free edge, then ever so slightly thicker at the stress area, then gradually thin out around the cuticle area.

After you are done sculpting and filing, you should be able to take a cuticle pusher and push the cuticle back without any resistance from the edge of the acrylic around the cuticle. It should be that well blended.You don’t want any “ledges” or “cliffs” around the cuticle.

To isolate the problem, try sculpting one entire nail from start to finish — even buffing it out — and see if you think there is something you could improve upon when you sculpt the next nail from start to finish. If you can find a guinea pig to practice this on, it would help you refine your technique immensely.

More FAQ

Problems with edges when doing acrylics?

I am still having a problem with my edges when doing acrylics. I would like to just get it right so I am not touching the sides and the cuticle.... read more

What is the best way to clean gel brushes?

I just started using gels. What is the best way to clean gel brushes?... read more

LED lamp efficacy across gel brands

Will the new LED lamps work with regular UV gels such as IBD, CND, or Star Nail, or does it only cure hybrid gels such as Gelish, Shellac, Gellac and other soak-off gels?... read more

How do I convince clients to try GelColor by OPI?

How do I convince clients to try GelColor by OPI?... read more

Can humidity cause lifting?

I live in central Florida. Every year when the humidity rises, natural nails start separating from the enhancements on the sides of the free edge. This leads to the enhancements chipping away. Every year, all summer long, I’m rebuilding free edges using forms and product. I’ve tried using a dehumidifier, but it does not seem to be helping.... read more

How can I get acrylic nails to shine better using top coats?

Can you tell me why when I use a top coat on acrylic nails the shine does not come out well? I must admit I don’t do the three-way shine after using the final white block prior to a polish application, but is there a best top coat for pure, long-lasting shine?... read more

Removing Gels to Apply Acrylic

There are many gel nail salons around where I live, meaning there are many people with gel nails. I do acrylic nails and I’m wondering if there is a special removal method to follow for gels because I know they don’t soak off like acrylic. I have a lot of people coming to me with their gel nails still on. Do I just thin them down as good as I can and apply the acrylic as usual? Will the acrylic still adhere with that thin layer of gel on? Or do I need to completely get rid of the gel and get to the natural nail to be able to apply the acrylic?... read more

Cleaning Dried Acrylic Off Brush

I need advice on how to get dried acrylic off my nail brush. I did my first set of fills today but now I am wondering how to clean my brush. My friend said soak it in acetone and then wash it really well. Could this affect my brush or is it OK to clean it?... read more

Acrylics Suddenly Lifting and Have Air Bubbles.

I’ve been a nail tech for three years and have worked at a few salons. I have since opened my own salon and am now having a problem with my acrylics. I am having a lot of lifting and air bubbles in the middle of the nail. I have never had this problem before. My technique has not changed. My prep is good. I remove the cuticle, rough up the nail, and prime. I have tried a few lines of products and it’s happening with all of them. Could it be the environment of the new shop? Please help!... read more

Clogged Airbrush

I have an airbrush machine that I have used one time. After that I have not been able to get any paint to spray out. I even bought a new attachment just in case I did something wrong or did not clean it properly. But before I try it again and risk ruining another attachment, can you please tell me what I might have done wrong? Is there a way to fix this problem?... read more

How can I make a correct C-curve without a tip and achieve an oval shape?

I don’t use tips — I’ve never been a fan. I build my pink-and-whites from scratch and have always been much happier with how they look and wear — my clients are too. But how can I make a correct C-curve without a tip and achieve an oval shape? I have several clients with an oval shape but I can’t get them this pointy and they end up having straighter sidewalls.... read more

I need help selecting a good UV light. What should I look for? Is price a good indicator?

I need help selecting a good UV light. What should I look for? Is price a good indicator?... read more