Nails
MenuMENU
SearchSEARCH

Technique

Can you offer any advice on how to keep my pink-and-white sculpts from turning out too thick?

June 1, 2005

Leeanne Colley: I suggest you concentrate on the correct mix ratio, which is most commonly medium-wet. Most nail techs find sculpting hard to master because you are building the enhancement to emulate the natural nail without the guidance of a tip. When liquid-and- powder systems are used with the correct mix ratio, the enhancement is strong enough without having to build an overly thick nail. Also, apply only one ball in each zone, which will prevent you from “patchworking” the enhancement.

However, you may add one tiny compact ball for each “dogear” to build a deep smile line when sculpting the free edge.When doing a backfill, be sure to rebalance each zone, not just the cuticle area.

Pam Karousis: First, check the type of brush you are using. Does it pick up too much liquid and powder, thereby creating a thick nail? You might try using a slightly smaller brush or a different shaped brush to see if that makes a difference. Is your white tip too thick? If this is the case, chances are you are trying to add enough pink to build up against the white tip. Ideally, you would sculpt a thin white tip and allow it to set before adding the pink. If it’s still too thick, you could wait until it sets up completely then gently thin it with a file to get the desired thickness before you add the pink. The finished nail structure should appear slightly thinner at the free edge, then ever so slightly thicker at the stress area, then gradually thin out around the cuticle area.

After you are done sculpting and filing, you should be able to take a cuticle pusher and push the cuticle back without any resistance from the edge of the acrylic around the cuticle. It should be that well blended.You don’t want any “ledges” or “cliffs” around the cuticle.

To isolate the problem, try sculpting one entire nail from start to finish — even buffing it out — and see if you think there is something you could improve upon when you sculpt the next nail from start to finish. If you can find a guinea pig to practice this on, it would help you refine your technique immensely.

More FAQ

Acrylic Glitter Mix Question

If I am mixing glitter into my acrylic powder what is the ratio I should use? Can I dip my wet ball into the glitter?... read more

Why aren't my soak-off gels looking shiny after the first few days?

All these soak-off gels are great, but I’ve noticed after a few days they aren’t as shiny as when first applied. I’ve tried several different top coats from regular nail polish top coats to the UV-cured top coats but they all peel off.  Any suggestions?... read more

Is it true that most white gels do not cure all the way?

Is it true that most white gels (whether traditional or soak-off) do not cure all the way? If so, why is that?... read more

A client wearing acrylics wants to come in weekly. Should another coat of acrylic be added or is there another procedure to follow?

A client wearing acrylics wants to come in weekly. Should another coat of acrylic be added or is there another procedure to follow?... read more

I have tried different products with no noticeable improvements [in lifting or popping]. Am I clipping too much?

I have been working as a nail tech for some years now, but have always had problems with clients’ nails lifting or popping off within two to three weeks. When they lift, I use a nail dehydrator after clipping the edges and filing the exposed natural nail, and then I double prime before applying acrylic. I have tried different products with no noticeable improvements. Am I clipping too much?... read more

Why do tiny white spots appear on my finished acrylics?

When I apply acrylic I sometimes get tiny white spots in my finished product. I was told that this could be from contaminated powder. I also sometimes get bubbles with the white spots. I assume the bubbles are form too much liquid to powder.... read more

If oil causes acrylic nails to lift, then why are we urged to use it and to tell clients to use cuticle oil?

If oil causes acrylic nails to lift, then why are we urged to use it and to tell clients to use cuticle oil?... read more

My client has constant lifting problems. Is she doomed to lifting, or am I doing something wrong?

I have a client whose nails always seem to lift around the cuticles no matter what I do. It happens as soon as her fill is finished. I’ve etched the nail well, cleansed it more than once, and always use a primer. Is she doomed to always have lifting, or am I doing something wrong?... read more

When someone comes to me for an acrylic fill and I wasn’t the one who put on the previous set, does it matter what product I use?

When someone comes to me for an acrylic fill and I wasn’t the one who put on the previous set, does it matter what product I use? Will my product adhere regardless?... read more

Can you use any primer with any acrylic?

Can you use any primer with any acrylic?... read more

What causes the burning sensation when gels are curing?

I recently tried out a UV light-cured gel system on myself. A couple of times, when letting the gels cure, I experienced a really intense burning sensation. What caused this and how can I avoid it?... read more

Could chlorine in the water make my client's acrylics lift?

I am a new tech with a client who does water aerobics for two hours each day. Her acrylics are always lifting. Could the chlorine in the water cause this?... read more