Nails
MenuMENU
SearchSEARCH

Technique

How Do You Deal with Breakage Caused by a Bad Batch of Product?

October 1, 1996

A while ago, many of my fill clients were coming in with broken nails. I became a detective and narrowed it clown to the liquid, which had a funny smell. My guess is that it sat on the shelf too long before I bought it. I guarantee my work so I explained the situation to my clients and offered them a free full set. Most of your loyal clients will understand.--Aimee Ginsberg, Salon 544 (San Luis Obispo, Calif.)

Recently, a couple of my nail technicians noticed that when they removed the polish from their fill clients, the nails had yellowed underneath and the product easily lifted off. We brainstormed to figure out the cause, and one of the technicians realized it was due to an old batch of acrylic powder. Only a couple of clients came in with broken nails, which we fixed for free.--Denise Adams, Beyond Nails (Florence, Mass.)

When a number of clients come in with lifting problems, at first you start to question your work: “Am I prepping the nail completely?” or “Am I using the correct liquid-to-powder ratio?” Actually, your liquid, powder, or both might have gone bad if you left it in the heat for too long. I had a bad batch of product once so I gave complimentary fills to my clients. If you aren’t honest with them, the word will spread last because many clients know each other. You want the word to be that you stand behind your work no matter the cause of the problem.--Nilsene Privette, Panaché Salon (Phoenix, Ariz.)

I bought a bad batch of tips once. As I was trimming them, they shattered so I thought my tip-cutter blade was dull. Many clients called me to complain that their tips were breaking. They were aggravated by the situation, but they understood once I explained to them the cause of the breakage. I gave them a free manicure and replaced the tips.--Elizabeth Kessler (Gaithersburg, Md.)

It’s never happened lo me, but if it did, I would give the client a free till. In order to keep your clientele, you pretty much have to eat it, and do whatever it takes to keep them happy. The buck has to stop someplace.--Judy Michaels, Sea Glide’s Salon (Malibu, Calif.)

I would offer the client a free till because it’s my responsibility if I know for a fact that the breakage was caused by a bad batch of product. I use only one product line and I know that the company stands behind its products and would do whatever it can to help it a problem arises.--Sandi Garcia, Nails by Sandi (Port Hueneme, Calif.)



More FAQ

Why is it that most of my acrylic clients are having lifting by the cuticle area?

Why is it that most of my acrylic clients are having lifting by the cuticle area? I prep properly, removing all the oils from the nail beds, and I prime twice. I’ve even considered using an 80-grit file. What can I do or what am I doing wrong?... read more

My clear and acrylic nails appear dull or frosted. What am I doing wrong?

After I apply clear or natural acrylic nails, they don’t appear clear. They have an almost frosted or dull look. What am I doing wrong? Am I applying too much?... read more

How to I keep wraps from lifting on a client with poor circulation?

I have a client with very poor circulation, and therefore, very cold hands, making it difficult to keep her silk overlays from lifting. I have already tried pH balancers and extra silk and resin, but the lifting continues to occur. What else could I try that might work?... read more

If I don't etch the nails before applying acrylics, do I need to apply more primer?

During my training for fills, I was taught to etch the natural nail regrowth for the strongest hold and to prevent lifting. Yet, I recently read that a technician did not etch the nail because it causes so much damage. I agree, but wonder what the major difference would be without etching? Should I apply more primer?... read more

Should I remove the gel overlay from my client's damaged nail?

I have a client who wears gels over her natural nails. She hit her nail really hard and although it didn’t come off, it did bleed underneath the nail plate. Should I remove the overlay from the nail? Should I be worried about infection setting in?... read more

Is it common to have to change products or procedures depending on the weather?

Is it common to have to change products or procedures (including changing the ration of the products) depending on the weather? Is it possible for perspiration to make the product lift?... read more

Can you over-cure gel?

Can you over-cure gel?... read more

Why do some of my clients feel a burning sensation when I use my e-file?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Why do some people wear gels over acrylic extensions?

I’ve heard that some people wear gels over acrylic extensions. Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this?

I’ve heard that some people wear gels over acrylic extensions? Why do they do this, and how do you do this? Is there anything you have to be careful of during the application?... read more

When I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. What can I do about this?

I have only had my license for six months, and I have definitely found that my e-file cuts down on time. The only problem is when I’m reducing the acrylic to take off old product, some of my clients feel a burning sensation. I make sure I’m not applying too much pressure. I have my RPM set at 15,000 and usually use a medium-grit sanding band. What can I do about this? Should I go back to carbide bits?... read more

Myth Busters: Will suntan lotion mixed with the ocean's salty water turn gels to goo?

I heard that if you go into the ocean with a lot of suntan lotion on, the small amount of acetone in the suntan lotion interacts with the salt water and can run down your fingers and turn your gels to goo. Is this true?... read more