Technique

How Do You Deal with Breakage Caused by a Bad Batch of Product?

October 1, 1996

A while ago, many of my fill clients were coming in with broken nails. I became a detective and narrowed it clown to the liquid, which had a funny smell. My guess is that it sat on the shelf too long before I bought it. I guarantee my work so I explained the situation to my clients and offered them a free full set. Most of your loyal clients will understand.--Aimee Ginsberg, Salon 544 (San Luis Obispo, Calif.)

Recently, a couple of my nail technicians noticed that when they removed the polish from their fill clients, the nails had yellowed underneath and the product easily lifted off. We brainstormed to figure out the cause, and one of the technicians realized it was due to an old batch of acrylic powder. Only a couple of clients came in with broken nails, which we fixed for free.--Denise Adams, Beyond Nails (Florence, Mass.)

When a number of clients come in with lifting problems, at first you start to question your work: “Am I prepping the nail completely?” or “Am I using the correct liquid-to-powder ratio?” Actually, your liquid, powder, or both might have gone bad if you left it in the heat for too long. I had a bad batch of product once so I gave complimentary fills to my clients. If you aren’t honest with them, the word will spread last because many clients know each other. You want the word to be that you stand behind your work no matter the cause of the problem.--Nilsene Privette, Panaché Salon (Phoenix, Ariz.)

I bought a bad batch of tips once. As I was trimming them, they shattered so I thought my tip-cutter blade was dull. Many clients called me to complain that their tips were breaking. They were aggravated by the situation, but they understood once I explained to them the cause of the breakage. I gave them a free manicure and replaced the tips.--Elizabeth Kessler (Gaithersburg, Md.)

It’s never happened lo me, but if it did, I would give the client a free till. In order to keep your clientele, you pretty much have to eat it, and do whatever it takes to keep them happy. The buck has to stop someplace.--Judy Michaels, Sea Glide’s Salon (Malibu, Calif.)

I would offer the client a free till because it’s my responsibility if I know for a fact that the breakage was caused by a bad batch of product. I use only one product line and I know that the company stands behind its products and would do whatever it can to help it a problem arises.--Sandi Garcia, Nails by Sandi (Port Hueneme, Calif.)

Topics:acrylic maintenance

More FAQ

What’s the trick to getting dark glitters to cure when doing rock star gel nails?

What’s the trick to getting dark glitters to cure when doing rock star gel nails? I do my nail prep, then a layer of Akzentz Base N Gloss. I cure and put another layer of Base N Gloss, then sprinkle on the glitter and tap off some of the excess. I cure after that, and I brush off the excess again when it’s done, but a lot of glitter will come off with it. And this is with a brand new gel lamp. So I put on more gel, more glitter, etc., but I’d like to get it right the first time to save time.... read more

What could be causing the gel to shrink?

So on my last client of the day, I finish her fill, buff her nails, apply gel top coat to one of the hands and it turns out fine. But on the next hand, I do everything like I usually do, but when I put the hand in the light to cure the gel top coat, disaster happens. One finger looks like it has a hole in it (in the top coat) and the others look like the gel has literally shrunk, and they’re bumpy too. I file it all off and start again, but the same thing happens. I try one more time, and it’s still the same. I do it all one more time and even use a different lamp, but get the same results. My bulbs in both lamps are about four months old, so they shouldn’t need replacing yet. What could be causing this shrinking?... read more

What's the trick to getting dark glitters to cure when doing gel nails?

What’s the trick to getting dark glitters to cure when doing rock star gel nails? I do my nail prep, then a layer of Akzentz Base N Gloss. I cure and then put another layer of Base N Gloss, then sprinkle on the glitter and tap off some of the excess. I cure after that, and I brush off the excess again when it’s done, but a lot of glitter will come off with it. And this is with a brand new gel lamp. So I put on more gel, more glitter, etc., but I’d like to get it right the first time to save time. And this only happens with dark colors. What can I do?... read more

What causes shrinking on gel nails?

Is there any such a thing as a "universal" UV light?

Is there such a thing as a “universal” UV light unit or do I have to buy a different light unit for each gel system? ... read more

Is there such a thing as a “universal” UV light unit?

Is there such a thing as a “universal” UV light unit or do I have to buy a different light unit for each gel system?... read more

What’s the best way to put on a tip?

What’s the best way to put on a tip?... read more

What’s the best way to do a pink-and-white backfill?

What’s the best way to do a pink-and-white backfill? I’ve been doing them for years now and I still can’t get my time down. I go back and forth between the traditional way and the reverse method and neither one cuts any time off. I don’t know if I’m over-filing during prep. It usually takes me an hour and a half. I cringe when I have to do one these days. Any advice on cutting time or a new way of doing it?... read more

What's the best way to put on a tip?

What’s the best way to put on a tip?... read more

What's the best way to do a pink-and-white backfill?

What’s the best way to do a pink-and-white backfill? I’ve been doing them for years now and I still can’t get my time down. I go back and forth between the traditional way and the reverse method and neither one cuts any time off. I don’t know if I’m over-filing during prep. But I do have a couple clients who make it a point to tell me how hard it is for them to sit through my long backfills — it usually takes me an hour and a half. I cringe when I have to do one these days. Any advice on cutting time or a new way of doing it?... read more

How do I prevent polish from bubbling?

On some of my natural nail clients my polish tends to bubble. I clean the nail plate with acetone very well before I polish. Then I use base coat, two coats of polish, and top coat. I usually have them hold their fingers in front of a fan between coats, and I spray a rapid dryer on after I finish. Any ideas? ... read more

How do I get acrylic or gel to stick to pre-designed nail tips?

I have decided to try pre-designed nail tips with art, but I am having trouble getting the acrylic or gel to stick to them. After a few days the product lifts off the tips. I tried to gently file the surface of the tip first, but then it takes the design off.... read more

Prev Next