Nubar’s Infinity UV Gel Kit contains everything you need to get started using gels. It has six colored gels, a clear builder, brush, prep, prime, and more. Infinity Traditional Gels are high-shine gels that can replace nail polish in a spectrum of colors. They apply easily and provide excellent durability and shine.

 

1. Gently push back cuticles and remove shine. Apply the UV Gel Prep (UV501) and allow it to dry. This will remove any oil. Then apply one coat of Nail Prime (UV502) to the nail plate on all 10 nails and let it dry for 30 seconds.

 

2. Apply forms to nails. Use the Infinity Gel Brush and apply the White Builder Gel (UV505) to the tip of the nail to create a thin white free edge. Pre-light for 30 seconds (this will help the white to cure properly) and then cure for three minutes.

 

3. Overlay the entire nail and tip with a thin layer of Clear Builder Gel (UV506). Cure for three minutes. Repeat this step until you have reached the desired thickness.

 

4. Once you have the desired thickness, add more builder gel across the stress area horizontally and let it self-level, creating an arch. Cure for 90 seconds. Remove the tacky layer with Nail Cleansing Solution (NAX 38-2) and a lint-free pad.   

 

5. File and shape the nails with the 150- or 180-grit Shaper File.

 

6. Repeat with your Nubar Diamont Buffer to refine the shape and surface of the nails. Remove the dust and apply one coat of UV Cure Top Coat Gel (UV503) and cure for 90 seconds. The UV Top Coat Gel will cure to a hard shiny finish.

 

For more information, go to www.bynubar.com.

For reprint and licensing requests for this article, Click here.

Read more about