NSI Cracked Ice

Give your clients sparkling, dimensional nails with NSI's Cracked Ice Nail Embellishments. 

Begin by properly prepping the natural nail.  Apply a tip. Cut and blend.

Step 1: Apply one coat of NSI Balance One Step Clear or Blush UV Gel to the entire surface. A thin coat of Balance Builder Clear or Blush can be substituted for the One Step Gels.

Step 2: Pick up the Cracked Ice glitter flakes with the tip of a nail brush. Begin to position the Cracked Ice on the nail.

Step 3: Continue Step 2 until the swirl design is complete. Cure for 90 seconds. Apply Balance Builder Clear or Blush as a second layer of gel to sandwich the design. Cure for another 90 seconds.

Step 4: After eremoving the tacky dispersion layer with NSI Cleanse, shape and buff the nail.

Step 5: Apply NSI Glaze 'n Go for a permanent high-gloss shine over the entire surface of the nail. Cure for 90 seconds. There is no dispersion layer to remove.

Step 6: Glistening, sparkling, dimensional nails.

Editor’s Note: All material in Demos is provided by the product’s manufacturer and is edited for space by NAILS. The full instructions are not necessarily contained here, so contact the manufacturer directly for complete directions for using these products.