1. File and shape the free edge of the natural nail to the desired shape using a nail file. Use Nubar’s Cuti-Care and gently push back the cuticles with a cuticle pusher.
2. Gently remove any loose cuticle.
3. Use Nubar’s Cleansing Solution and a lint-free gauze to wipe the nail of any extra dust and to balance its pH.
4. Apply Step #1 UV Gel Prep UV501 and allow it to dry. This is a dehydrator for the nail bed and will get rid of oil and impurities. Apply one coat of Step #2 Nail Prime UV502 to all ten nails and let it dry for 30 seconds. Nail Prime will look wet with a shiny appearance when dry. Be sure not to touch the surrounding skin and cuticles with the Nail Prime.
5. Apply one layer of Gelicure Base Coat in a thin application and seal the edge of the nail. Cure for two minutes in a UV light or 20 seconds in an LED light.
6. Apply one layer of Gelicure color in a thin application and cure for two minutes with a UV light or 20 seconds with an LED light. If additional coverage is desired, repeat.
7. Apply Gelicure Top Coat Sealer and cure for two minutes in a UV light or 20 seconds in an LED light.
8. Clean the nail plate using a lint-free wipe and Nubar’s NAX38 Cleansing Solution. Wash hands with soap and water and massage in cuticle oil.
For more information, go to www.buynubar.com.